Availability: | |
---|---|
Quantity: | |
Automatic Assembly Machine for AV Fistula Needle
1. Fully AV-fistula needle machine could feed all components by vibratory feeder controllers
2. Machine is equipped with adhesive dispensing system, make solidification
3.With automatic testing device for glue and flow meters, tolerance between plastic clamps and long tube is controlled ±5mm
3. Inside of needle with silicone oil two times,needle assembly depth: 0-1.5mm
4.With stable sideway device make sure all fixtures moving smoothly. filtered gas is reduced to 0.05~0.1Mpa and inflated on the joint side.
5. With automatic unloading system,Precision flow sensor for flow detection.
6.AV fistula needle machine is designed with monitoring date for NG/OK products, for negative products could be recognized ,and then designed with negative station.
Automatic assembly machine for AV-fistula needle machine could test blockage, feed protective cap , plug and remove protective caps ,then do the process apply inside of needle silicone oil, the feed need, wing house, apply UV adhesive, control needle angle, burr ,with CCD detection and so on.
Automatic Assembly Machine for AV Fistula Needle
1. Fully AV-fistula needle machine could feed all components by vibratory feeder controllers
2. Machine is equipped with adhesive dispensing system, make solidification
3.With automatic testing device for glue and flow meters, tolerance between plastic clamps and long tube is controlled ±5mm
3. Inside of needle with silicone oil two times,needle assembly depth: 0-1.5mm
4.With stable sideway device make sure all fixtures moving smoothly. filtered gas is reduced to 0.05~0.1Mpa and inflated on the joint side.
5. With automatic unloading system,Precision flow sensor for flow detection.
6.AV fistula needle machine is designed with monitoring date for NG/OK products, for negative products could be recognized ,and then designed with negative station.
Automatic assembly machine for AV-fistula needle machine could test blockage, feed protective cap , plug and remove protective caps ,then do the process apply inside of needle silicone oil, the feed need, wing house, apply UV adhesive, control needle angle, burr ,with CCD detection and so on.